craigslist | tools in austin

Honda Harmony 21" Mower OHV (NW Austin) $199

2008-05-12T21:53:24-05:00

Honda HRT216 Harmony II with QuadraCut System 21" mower. Honda engine model GCV160 OverHead Cam with easy-start. This unit has std rear bagger that also can be converted to side discharge or mulcher as desired.

Mower is 100 percent, starts first time, just like off the showroom floor for hundreds less.

Riding Lawnmower (bastrop)

2008-05-12T21:49:52-05:00

Craftsman 12HP OHV 5 speed 38" riding lawnmower

non-running great for parts, been tuned about a year ago.
Front right tire bad , all can be fixed.
Still could be a good mower.

Ill let it go to the best offer. 512-905-4213 or leave mess.

14 volt Black and Decker battery charger $25

2008-05-12T21:18:20-05:00

New Black and Decker battery charger model FS14C

Senco Nail Finish Pro Gun (Cedar Park) $75

2008-05-12T21:12:11-05:00

Senco Nail finish pro air gun $75.00 Call Dave 512-944-6075

Paslode Roofing Stapler (Cedar Park) $35

2008-05-12T20:59:58-05:00

Paslode wide crown roofing stapler (air gun) 16 ga. Call Dave @ 512-944-6075

Wagner Airless Paint Sprayer (Cedar Park) $100

2008-05-12T20:54:39-05:00

120V Wagner paint crew airless sprayer, 25 ft hose Call Dave 512-944-6075

Plazma Cutter (50Amp) (Pflugerville) $420

2008-05-12T20:08:51-05:00

Up for sale is a 50 Amp CUT50D dual voltage plasma cutter. The unit has been tested by me personally and it works great. It cuts through steel and other metal alloys like a hot knife through butter. This unit is no different than the ones you see on the internet that retail for $579.00.

The cutter comes with the following:
* 50Amp Dual Voltage Unit
* 10' Cutting Torch
* Ground Clamp
* Air Regulator with Pressure Guage and Mounting Bracket
* Air Hose with clamps
* Consumables: 4 tips, 4 electrodes, 4 gas diffuser, 4 shield cups
* English instruction manual.
* Tube Fittings
* Teflon Tape

Air requirements: 60-75psi @ 4.5cfm
High speed cooling fan.
Has built in thermal overload protection

This unit will cut:
17" Per minute on 1/2" Thick Steel
6" or 7" Per minute on 3/4" Thick Steel
and it will Severance Cut 1" Thick Steel

Here are some photo's:
http://s261.photobucket.com/albums/ii69/tgonsoulin/?action=view¤t=100_2184.jpg

Complete Victor torch, gauges, bottles, cart (2 each) (GIDDINGS) $460

2008-05-12T20:04:37-05:00

This is two complete Victor torch rigs with bottles. These are owner bottles and they have good dates on them. The 80 ox and B acety have a medium Victor CAl350 and a 100 handle torch with Victor SR450 series gauges. Bottles are full, cart, new hose, striker and it has a Victor welding tip. The second one has a 125 ox and B acety bottles. Good dates and they are full. This one has the big Victor CA1050 and a 315 handle torch set up with the Victor SR450 series gauges. Same, new hose, cart, striker and a welding tip. Price is $460.00 firm. I live close to Giddings.

10" radial arm saw (East Austin) $100

2008-05-12T19:52:26-05:00

In good working condition. $100 obo
call Matthew - 689-9892

lincoln 135 amp 110 volt welder (east austin) $325

2008-05-12T19:37:42-05:00

2 1/2 years old, very handy welder. will consider trade for a gas generator of 5000 watts or more. for quicker response, call instead of email, luke at 825-5030

job box for job site or trailer like new (san marcos) $200

2008-05-12T19:31:47-05:00

selling a job box that was mounted on my trailer and need to sell it. got it about three months ago like new you can call me at 512 557 5481 and the name is paul

concrete mixer (san marcos) $200

2008-05-12T19:22:14-05:00

selling a concrete mixer 3.5 c.f used it for about 3 months and dont have no need for it. you can call me at 512 557 5481 and the name is paul

Used Skilsaws (Hutto) $50

2008-05-12T18:59:22-05:00

I have two used skilsaws that I want to sell for $50 OBO. The model numbers are 5150. They are 7 1/4" circular saws and are 120 Volts. You can call me at 512-696-8290.

Thanks

snap on toolbox (leander) $3000

2008-05-12T18:21:28-05:00

need to sell snap On tool box is in good cond feel free to contact if you want to take a look or want to make an offer

Workmate Workbench (central austin) $25

2008-05-12T18:08:59-05:00

Small bench with vises. Still in box - brand new.

Grizzly sheetmetal Brake model G7150... (so austin) $900

2008-05-12T17:33:54-05:00

Brake model G7150.....512.736.3104....dew468@msn.com

Brand new Under counter lights** (austin) $40

2008-05-12T17:26:14-05:00

Selling two NSL Under counter lights, good quality lighting
Each retails for about 50 bucks, you get both for 40
Bronze in color, but it doesn't really matter since all u see is the light.
17 1/2x 4 x 1 1/4
still in box

BRAND NEW MOTION SENSORED FLOOD LIGHTS (SOUTH) $40

2008-05-12T17:20:42-05:00

SELLING 2 BRAND NEW MOTION SENSORED FLOOD LIGHTS
40 FOR THE PAIR
eACH HOLDS 2 150 WATT BULBS,PLENTY OF LIGHT
tHEY EACH RETAIL FOR 40.00 A PIECE, BUT U GET BOTH FOR 40 BUCKS
EASY TO INSTALL
DARK BRONZE COLOR

new #8 gauge sears heavy duty jumper cables (south austin) $15

2008-05-12T17:08:36-05:00

new in the box 12 foot #8 gauge heavy duty sears jumper cables $15. new in the store $24.99 plus tax. jerry at 922 5218 (austin cell). 7 am til 10 pm

Brake Lathe For Sale (Buda)

2008-05-12T17:01:51-05:00

Hunter 205 C. Brake Lathe for sale.
Great Condition!
Comes with Truck adapters and
Hub less Rotor Adapters.

Have over 7k invested in this tool, but will a great deal for someone. Asking 2000. obo
We HAVE to sell this, so Please Call Earl at 512-803-4073 for more information, Serious offers only.
We need money ASAP so we can work out a great deal, please call and make an offer!! Or email!

Shape-Rite Model B 8" Metal Shaper (North Austin) $750

2008-05-12T16:56:40-05:00

Moving Sale! Havir Shape-Rite model B universal shaper. 8" stroke, rotating table, paint looks bad (what is left of it) but it is a tight smooth machine. Includes a 6" Kurt clone cnc vise. 3/4 HP 3ph motor, runs on 3phase power or can easily run off of a static or rotary converter, or vfd, or a common 120 volt single phase motor with a pulley swap. This shaper can be removed from the base and used as a benchtop model (like a SouthBend or Atlas shaper) or used on it's base fore extra stability. Weighs about 650 pounds and I can help deliver and setup in the immediate Austin area. Ronk rotary converter is possibly available with this shaper. 512-698-5549. No checks, no shipping, no scams. If you know what this is and having been looking for a small shaper, you know how hard they are to find around here.

FOUR Chain Saws for one low price (Central Austin) $80

2008-05-12T16:52:30-05:00

Four Chain Saws...all run. Two Poulan electric saws, one Remington electric saw, and one Remington gas saw. The first person here with $80 cash gets them all! Call 217-7884 or email.

Enco 9x42 3HP Varispeed Milling Machine (North Austin) $2750

2008-05-12T16:44:15-05:00

Moving Sale! 9x42 Enco milling machine. 3HP varispeed head (no more changing belts to adjust speeds)with 70 to 4200 RPM range. Power feed on X table axis and automatic quill feed for boring. Enco digital readout on the X and Y axis and a LCD Mitutoyo scale on the quill. 3 phase 10A 220V but I can include a 5HP Ronk rotary phase converter for and extra $150, and that can power many additional pieces of equipment. Includes a Kurt D-60 vise, collet set, hold downs, and other assorted flotsam. One shot lube, tilt and nod head, moveable ram, common R-8 spindle. This is a solid box way machine that shows no wear, has no holes drilled in the table, and other than a little oil staining, looks virtually new. I am getting ready to move and already have two other mills, so something has to go. The head on this mill rotates and tilts and easily fits under a garage door and does not take up much more space than a baby bench top mill. If you have been suffering with a horrible freight mill drill and are ready to upgrade to something more solid, put your tax rebate to fun use. I have a trailer and hoist and can help deliver and setup in the immediate Austin area. And no, I will not cash your cashiers check, ship it to Africa, or swap it for your brother's motorcycle since he is in jail and can't use it anyway. 512-698-5549.

craftsman 26 piece 1/4 to 1 1/8 open end box end wrench set in case. (south austin) $36

2008-05-12T16:24:46-05:00

this craftsman open end box end set is in a hard case. 1/4" to 1 1/8 . 26 pieces. new at sears is $56. plus tax. i need $36 for it. it is new. jerry at 922 5218(austin cell) from 7 am til 10 pm or e-mail.

207 piece tool case, never used. (south austin) $55

2008-05-12T16:17:32-05:00

this tool set new in the case has 207 pieces. sockets, open end box end wrenches, drill bits, hammer,nail bar, tape measure, torpedo level, cresent wrench, straight pliers, water pump pliers, allen wrenches (metric & standard),center punch, hack saw, screw driver sets, screw driver socket set and much more. it is $89 in the store plus tax. i need $55 for it. jerry at 922 5218 (austin cell). 7 am til 10 pm thanks

Golf Club Sanding and Refinishing Machine (7200 South 1st Street) $175

2008-05-12T16:03:45-05:00

Ralph Maltby Enterprises Sanding and Finishing machine in perfect working order. Comes with a bag of wheels and accessories.$175

Speedaire compresor (nw austin) $175

2008-05-12T16:01:36-05:00

Speedaire model 3Z323 845-6085

Almost new cordless DRILL - with charger (South Austin) $15

2008-05-12T15:41:15-05:00

I received this as a gift and used it once. It got a little white paint splattered on it from another project, but besides that is in as new condition. Works fine for small around the house stuff. I have too many tools, so come grab this if you want it. 512.626.8700

power tools (Bastrop)

2008-05-12T15:35:25-05:00

Craftsman floor model drill press. good condition. $100.00

Cambel/Hausfeld air compressor. 20 gal. good condition. $150.00

512-303-2705 or waitt400@gmail.com

Ryobi Cordless Drill / Driver & Vacuum cleaner, & Carrying Case (Parmer Ln / Mopac) $15

2008-05-12T15:28:02-05:00

This is a 12 Volt, 3/8 inch chuck, cordless drill / screwdriver (variable speed & torque settings, reverseable), and dustbuster type vacuum cleaner, which both use the same style battery. I have one battery, but am missing the charger. The carrying case is included. Please call 977-0007 to buy.

Office Closing, Desks & Tools (Leander) $1

2008-05-12T14:41:05-05:00

Must sell this week!
We have:
desks
desk chairs
filing cabinets
conference table/chairs
sturdy wooden shelving
metal shelving
tons of corrugated bin boxes
tools
Small production facility and machine shop is outsourcing fabrication and assembly and we no longer need out equipment.

In Leander, Right behind Dominoes Pizza just south of new HEB.

Jet Mill 9x42 w/tools
Jet Gear Lathe GB-1340 w/tools
Brake
Saw
10T Press
60T Press
Thermotron Temp Chamber
Curing Oven
Desks
PCs
and more....

303 N. Hwy 183

Sales Starts Wednesday..... except for big machines they are for sale now.

Thanks

Work Benches (7200 S 1st St 78745) $175

2008-05-12T14:23:09-05:00

One solid Oak top Grainger work Benche with metal legsand metal shelving. A bit dusty, but not marred or damaged, barely used.$175

Large Bucket for Forklift (N. Austin) $900

2008-05-12T14:16:57-05:00

Large Universal bucket for forklift. Built by STAR Technologies. 1.6 cubic yard capacity. 2005 model. Good condition. Will work on Lull, Skytrack, Gradall, Hyster, just about any forklift. Great for Demolition, roof work, light dirt work, etc.. Retails $2350 new (before steel prices went up). Great value for $900. Will trade for 8in or 10in purlin, will consider other trades. Thank you.
Tony
512-525-3344

Like new 5550 generator (price reduced) (Kyle) $500

2008-05-12T14:07:17-05:00

This generator has a Briggs and Stratton motor with 5550 running watts and 8550 starting watts. It is like brand new only used a couple of times. It has a heavy duty extension cord still in the plastic ($90 value).

Call Tony
512-217-5867

Shop Vac (RR) $30

2008-05-12T14:04:27-05:00

5.o HP, 11 Gallon tank, attachments, call 248-0330

Assorted Wood Clamps $2

2008-05-12T13:17:06-05:00

FOR SALE: Assorted Wood Clamps. $2/each. Our Move is you savings.

Rockwell Table Saw - 12" (Buchanan Dam, TX) $325

2008-05-12T13:11:15-05:00

Rockwell 12" Contractor's Saw, Model #34-388. 110/220 Volt Motor currently set up for 220 electricity. Belt driven, good ripping saw with fence and miter gauge. Call Tom 512-293-2369.

Coleman Powermate Electric Generator (Buchanan Dam, Tx) $450

2008-05-12T13:10:31-05:00

Coleman Powermate 6250 watt electric generator, 110/240 Volt, 20 amp, 10 Horse Power Briggs & Stratton engine. Low oil sensor, receptacles on control panel. 6 gallon plastic fuel tank, portability kit, circuit breakers. Used 25 hours. Call Tom, 512-293-2369.

Dillon Case Cleaner and Media Seperator (North Austin) $100

2008-05-12T12:41:03-05:00

The springs have a little surface rust but do not affect operation. I've sprayed them with WD-40 and they look much better than in the current pics. Both items are in good working order and would cost $140 plus shipping or more online. Price is $100 cash firm.

Willing to meet halfway (within reason) if you are far away from North Austin.

Misc. Tools (South Austin) $85

2008-05-12T11:25:58-05:00

Craftsman light and cordless toll $25
Robi drill $10
Ram set $10
Heater $20
Compression guage $5
Helium valve $10
Air Hose $20

$85 takes all

Please call 276-3825

DeWalt DW331K Jigsaw - Sells new for $170 (Anderson Mill area) $100

2008-05-12T11:22:31-05:00

Great shape, with very little usage. I have another jigsaw I prefer to use.

Product Description
6A, Heavy Duty, Top Handle Jig Saw Kit, 500-3,100 SPM, Tool Free Blade Change & Shoe Bevel, 4 Position Orbital Action, Variable Speed Control, Low Vibration, Large Rubber Gripping Surface, Flush Cut Capable, Dust Blower, 1" Stroke, Includes: Blades & Case.

Shane 589-7324

STIHL Electric Trimmer FSE 60 (Wimberley or Round Rock) $60

2008-05-12T10:40:18-05:00

This was $110.00 new. It was barely used and I still have the instruction book and extra line. Thanks for looking!

landis 5 in 1 leather tool (austin texas) $200

2008-05-12T10:29:59-05:00

I do not know much about this except from the research I have done online. The tag is missing I am guessing that it is the Landis 5 in 1 from pictures I have seen online. Looking on EBay I see they sell from 200-500 dollars depending on condition and the shipping is around 60 dollers.

I thought I should try to sell it locally first before hassling with eBay and shipping.

Temperature Chamber, Thermotron, Heat, Cool, Humidity (Leander) $5500

2008-05-12T10:08:26-05:00

Dual Compressors, for cooling
Humidity Control, but I have never used it
Model: SM5.5C
Elec: 230 3 Phase
Controller: needs a new one
Mechanically and electrically sound.

Craftsman 6.5 hp 22" Lawn Mower (Round Rock) $100

2008-05-12T09:59:35-05:00

Up for grabs is this Craftsman 6.5 hp 22" Lawn Mower. It is used but in perfect working condition. I recently replaced the air filter, spark plug and changed the oil. The mower has never had any problems and faithfully starts everytime. Feel free to call with any questions, Thanks!
497-4458

Hydraulic Press, 60T,USA Made, (Leander) $2500

2008-05-12T09:55:02-05:00

Nice, 120,000 lb capacity press. Used to calibrate loadcells.

Made in US by Nugier. about 7' tall

Craftsman Air Operated Framing Nailer (Austin/Elgin) $100

2008-05-12T09:34:25-05:00

This is a Craftsman framing nailer, model #351-18320. It works perfectly and is ready to go to work. I got it along with some other tools and I already had a framing nailer. So, someone else can enjoy this tool. It appears to have been lightly used as you can see in the pictures.

Sears price on their current model is $279.95. See http://www.sears.com/shc/s/p_10153_12605_00918179000P?keyword=framing+nailer

This unit uses the clip head nails up to 3 1/2 inch in length.I also tried some full head nails that I use in my Porter-Cable nailer and they work fine too.

Please call me at 512-914-9818 to take a look. $100 cash (firm price) will take this tool to your home.

I am willing to meet you in Elgin if this is closer than North Central Austin (Allandale) if that is more convenient.

Honda ES4500 Generator (Cedar Park area) $400

2008-05-12T09:25:08-05:00

For Sale used Honda Generator model # ES4500, runs great! 4500 peak watts, 3600 watts normal running, 120 and 240 volt AC output with 12 volt battery charger connection, remote start/stop (optional, but with on unit), idle control and dual breakers. Honda engine runs very strong and starts on first or second crank generally every time (Honda engines are great). Engine also has a starter motor with key start if you prefer, but requires a battery. On four wheels with one wheel which will lock in place for transport or stationary use. If interested please call Buddy at 512-567-7818, Thanks for looking!
Asking $400.00 Cash only please.

* POWERS FASTENERS BITS FOR SALE * (AUSTIN , TEXAS) $40

2008-05-12T09:06:13-05:00

POWERS FASTENERS BITS FOR SALE

1. SDS-MAX SHANK NO.00975 ONE PIECE BRUSHING TOOL 10' THERE ARE TWO.

2. SDS-MAXTRI- CUTTER HEAD CARBIDE DRILL BIT N0.8817.

3.SDS-MAX SHANK BULL POINT CHISEL NO.00966 18'

I KNOW NOTHING ABOUT THESE ITEMS SO IF YOU KNOW PLEASE FEEL FREE TO LET ME KNOW.

I WANT TO SELL THEM ALL TOGETHER IF I CAN.

I ASKING $40.00 FOR ALL, IM NOT SURE IF THATS A FAIR PRICE SO YOU CAN ALSO MAKE ME A OFFER, BUT PLEASE BE FAIR.

YOU MUST PICK THEM UP.

CASH ONLY PLEASE !!! CALL: 512-258-5818

Proto 3/4" Drive Sockets - Great for Tractor Work! (NE Austin) $145

2008-05-12T08:54:02-05:00

This is great for working on tractors or other agricultural machinery - anywhere you've got BIG nuts and bolts! Proto Professional 3/4" drive socket set with Ratchet, 16" extension, sliding T-handle, 3/4 to 1/2 converter, metal storage box, and 12 sockets. It's not quite a complete set of sockets, but there's a good start here, or it's worth this price just to have duplicates!

Sockets include 15/16", 1", 1-1/16", 1-5/16", 1-7/16", 1-1/2", (2) 1-5/8", 1-3/4", 1-13/16", 1-7/8", and 2".

Most of the sockets are Proto, however there are a couple of Allens, one SK, a Blackhawk, and a Craftsman - all top quality, American Made tools. No Chinese crap in this set.

If you know tools you know the value of a set like this. The ratchet alone sells for over $110 new, and the 2" socket is $44 new. Shoot me an email and let's make this great quality, tough set of tools yours.

10" DELTA TABLE SAW (Kyle-Buda) $95

2008-05-12T08:53:54-05:00

10" delta table saw.Used very little,great shape,with instruction manual.512-751-0435.

Welder, Saw and Drillpress (Hutto, TX) $750

2008-05-12T07:06:51-05:00

Everything for $750 or

Lincoln Welder � SP 135 MIG Welder, 110 electric ($400)

DeWalt Chop Saw � Carbon blades for cutting metal ($150)

Clarke Metalwork 4 �� Bandsaw ($100)

Clarke Metalwork Drill Press �� Chuck ($75)

12 Ton Piper Binder with Accessories ($75)

Call (512) 642-6761 or cell phone (with Houston area code) 1-281-352-1837

Rigid Compound Miter Saw, Like New (AUSTIN) $85

2008-05-11T23:01:47-05:00

Rigid Compound Miter Saw, Like New

Craftsman 3 Drawer ToolBox (South Austin) $40

2008-05-11T22:50:27-05:00

Wdith X Height X Depth = 20 1/2" X 12" X 9"
Selling my lightly used Craftsman toolbox. This has only ever been used to store items and has not been lugged around at all. So it is in very good condition and comes with a pair of keys to lock the toolbox if needed. New this cost me about $75. I'll throw in the plastic RotoZip cap with the toolbox.

Ingersoll Rand 1/2" Drive Impact (South Austin) $120

2008-05-11T22:30:55-05:00

1/2" Drive Composite Ingersoll impact wrench 2131 QT, one of the quiet tool models. Torque working range from 50-500 ft lbs with 600 ft lbs max reverse torque. Light and easy to use, this impact is not quite a year old and has been used very little. Bought for work and then ended up getting a more powerful IR and no longer needed it. Retails at Sears for $200.00

Hobart Beta Mig 250 Welder: Sell or trade (Wimberley) $895

2008-05-11T21:33:02-05:00

240 Volt Hobart Beta 250 Mig CV Powersourse wirewelder W/ Prince aluminum spool gun ( unit welds both steel and aluminum) and regulator w/ gas line. (no bottle) on casters. Works well. Pick up in Wimberley, or if I deliver it, I need to get a $50 loading and delivery fee which is due wheather you buy the unit or not.
I'll trade for a tree shear, backhoe or auger attachment for my 743 Bobcat. Depending on condition, I will add cash.
$895 Works very well, so it's sold as is.
I am not in dire need of the space, (but it would be convenient to have the space back), nor am I strapped for cash and I am not married, so feel free to make an offer, but know it may not be accepted.
LOCAL SALE ONLY, CASH ONLY. I WILL NOT SHIP NOR WILL I CASH YOUR CASHIERS CHECKS OR MONEY ORDERS FOR YOU!!
Thanks, Lee @ 466-9877

DeWalt 18 V Hammer drill and circ. saw (or trade) (Austin) $85

2008-05-11T21:15:59-05:00

I've upgraded, so I have a well used DeWalt 18 V Hammer drill and circ. saw w/ working charger and 2 DEAD batteries w/ case. I've used these for quite a while and they still work very well, just need new batteries. Will trade for 18V DeWALT Impact gun W/out batteries or charger. Thanks, Lee @ 466-9877

air regulators (austin) $40

2008-05-11T20:46:35-05:00

two air regulators in good condition! 20.ea.

18" Sears Scroll Saw with Table -- $40 (Pflugerville)

2008-05-11T20:44:45-05:00

This is an older 18" Sears scroll saw with a Dunlap motor, as pictured. It is mounted on a wood table. Everything works, but it needs new blades and the belt that goes between the motor and the saw.

RKI Tool Box (SW Austin) $450

2008-05-11T18:34:25-05:00

Brand new RKI tool box, outside has been rhino lined, never been used, call me if you have any questions, $450 OBO 512-971-5045

trailer (Cedar Park) $260

2008-05-11T18:31:48-05:00

Small trailer, no deck. Tires hold air. Chevy(?) six lug wheels. New wheel studs, lug nuts, inner wheel bearings, 2" ball size hitch, light kit. Bearings freshly packed. Light kit not installed.

Ready to make it what you want; motorcylce trailer, tool trailer, welding equipment trailer, lawn mower trailer ....

Metal frame is 28 1/4" x 57 1/2",

Metal frame to center of ball is 30 3/4",

50 1/2" between the tires.

Radial Arm Saw (Cedar Park) $150

2008-05-11T17:33:48-05:00

10" Craftsman Radial Arm Saw model 113.19760 with stand, 512-259-1814, leave message

10" Chop/miter Saw (Kyle) $50

2008-05-11T17:20:11-05:00

I am moving and need to sell. Saw is only a few months old. Has been used a total of three times on little projects. In great shape.

10" table saw (Kyle) $70

2008-05-11T17:20:03-05:00

Moving and need to sell. Saw is only a few months old. used a total of three times on small projects. In great shape.

mechanics tools (nw austin) $450

2008-05-11T17:13:23-05:00

1-air operated overhead valve spring compressor w/extra air cyl.
1-central pneumatic 1/2" air impact tool [new-never used]
1-niefoff "bright lite" timing light
2-8" screw type "c" clamps
misc valve tools for ford v-8 flathead engine
all for $450.00 cash - no checks - Carl @ [512] 346-5747

Craftsman 3800 Watt Generator (Central Texas) $450

2008-05-11T16:48:52-05:00

This generator has had very little use. It has the 7.8 Overhead Valve

Call (512)577-1006 or email

Craftsman 15 gallon/3 HP Air Compressor (Central Texas) $165

2008-05-11T16:38:34-05:00

Works great. Very good condition

Call (512)577-1006

Heavy Duty Tool Lot, Snap-on, Craftsman, 3/4 Drive R + S set & more (South Austin) $350

2008-05-11T16:20:55-05:00

Heavy Duty Tools, craftsman 3/4 drive socket and ratchet set, some 1 inch drive sockets, plus 1inch to 3/4 adapter, Vulcan Ratchet Head w/ Long and short handles,

Snap-on angle wrench open end set, 9/16 to 1&1/2 inch

9 Large wrenches, all Craftsman, MAC or Snap-on

3/8 inch drive & 1/2 inch drive Proto torque wrenches NEW!!

3/8 drive Snap-on torque wrench good condition

All tools in good condition and are Brand Name Products (can be traded in for Brand New ones)

For More info please call (512) 809-0224

Skil Model 1823 Plunge Router (2222/620) $40

2008-05-11T15:37:34-05:00

8.5 amp
1 1/2 hp
25,000 rpm

ToolPak by Paktek(Attention A/C Techs and Electricians) (South Austin) $50

2008-05-11T15:36:49-05:00

Patent number 5,209,384.
New features!
Ergonomic shoulder straps with convenient utility loops.
New bigger, heaver zipper.
New padded handles.
New heavily-padded back panel.
New water-proof exterior to protect tools from moisture.
New rigid panel design.
Over 100 pockets and holders.
Unique system keeps tools in place.
Six individual panels including:
Large Document Panel
Screwdriver Panel
Pliers Panel
Utility Panel
Wrench Panel
Socket Panel
2 outside pockets which are large enough for Inside Organizers, drills and drivers, meters and sensors, safety equipment.
Lockable, heavy-duty zippers.
Specialized Trouble Light Loop with quick-release buckle inside the top pocket.
Made from layers of waterproof, 1000 denier nylon.
Dimensions: 18.5" X 14" X 3" to 10" (Depending Upon The Contents)

Tools are not included and price is firm. (512)428-4820 or (361)676-7878

Ryobi Belt Sander BE321T2 (222/620) $25

2008-05-11T15:27:12-05:00

http://www.ebuild.com/product-detail/tools--equipment/sanders/482295.hwx

3x21 in belt size

porter cable 7500 wattt generator (south austin) $800

2008-05-11T15:05:10-05:00

puch start generator runs great

TWO LARGE 10HP TUBILAR STAINLESS STEEL BLOWER / ATTACHMENTS (AUSTIN) $2000

2008-05-11T14:36:00-05:00

NYB NEW YORK BLOWER 10 HP MOTOR TUBILAR STAINLESS STEEL BLOWERS .
WORTH OVER 10K NEW
ASKING $2000 FOR BOTH .
949-637-6118

Stanley� Blower Fan NEW (AUSTIN) $35

2008-05-11T14:33:26-05:00

Stanley� Blower Fan

High velocity motor for maximum air stream
3 powerful speeds
Two 120-volt outlets
Rugged easy to carry handle
10' cord with grounded plug
Fully assembled
For cooling, ventilating, exhausting and drying
CFM on low 1280, medium 1750, high 2180
Black and yellow
UL listed

CALL 949-637-6118
I HAVE SIX TOTAL .

Craftsman Air Compessor 4HP/25 Gal (dripping springs) $200

2008-05-11T14:31:47-05:00

Model No. 919.152920

Single Cylinder/Oilfree
Wired for 120V can be wired for 220V
In very good condition, used only a few times
Never damaged, no leaks, nothing weird here, just bigger than we need.

$250./OBO
287.0618 Cris

1/0 welding leads (183 & 71) $150

2008-05-11T14:23:09-05:00

I have 500 ft of welding leads that are in very good shape. I will sell 100 ft sections for 150 dollars. They come with lenco quick connects also.

Call Alex at 409-594-5909.

Thanks

Tool Sale- Grinder, Router, Sander, Drill, Compressor (LOCKHART)

2008-05-11T12:03:13-05:00

Residential remodeler is making room in the shop for new equipment. Selling multiple pieces used in different trades. Due to time constraints and ease of purchase, some of the items listed will need to be sold as kits. These kits will be greatly discounted to sell quickly. Some exceptions may be made.

Task Force, 4" Grinder, $15.00.
Rockwell routers, one with frayed ford but both run very strong, $50.00/pair.
Black and Decker sander, $10.00.

Porter Cable 19.2 volt drill, battery and charger with case, $80.00.
Milwaulkee corded drill, 1/2" drive, $35.00.
Black and Decker corded drill, 1/2" drive, $15.00.

Tile Kit, $15.00.

Husky Compressor, 2 gallon, 100 max PSI with 1 1/4" for brads or staples and 50' long 3/8" hose, $80.00.

Greenlee Job Box (Lockhart) $300

2008-05-11T11:53:12-05:00

Greenlee job box with dual locking set and key. Heavy duty 48x24x24, very good condition $300.00, firm.

BOSCH Hammer drills 1- like new, 1 - like used $100

2008-05-11T11:05:15-05:00

My babies. I love these drills, but I don't have the work for them anymore.

The 11224 VSR is much newer
The Bulldog X-treem 11255VSR is older but stronger.

100 each

Scott 435-764-2368

Other tools for sale, Transit 250, BOSCH cordlass saw and drill set 250, Hitachi Nail gun 100.

CST \ Berger Transit with Stand and Story pole (Any) $250

2008-05-11T10:57:34-05:00

This another tool I shouldn't have bought, as I have rarely used it in one year. The Story pole is a little scratched up on back, but it works fine. The actual transit is like new.

Scott 435-764-2368

Other tools for sale, Hitachi Nail gun 100, BOSCH cordless saw and Drill set 250, Bosch hannes drills 2 @ 100 each.

HITACHI Pneumatic Nail gun (between Kerrville and Austin) $150

2008-05-11T10:49:52-05:00

I bought this new 3 months ago for one odd job, haven't used it since.

I'm driving to Ausin from Kerrville through Fredicksburg, staying in Autin tonight then back tomorrow.

I've got other tools for sale too, Bosch cordless saw and drill set 250, Transit, 250, 2 Hammerdrills 100 each.

Scott 435-764-2368

Ladder rack (Cedar Park) $100

2008-05-11T10:45:11-05:00

Very sturdy ladder for Ranger/Mazda/S10 size pickup. 203-6833

BOSCH Cordless Skillsaw Recprocating saw and Drill (austin) $250

2008-05-11T10:40:32-05:00

Less than a year old. Being a Mason I didn't need to use these very much. The drill has seen the most work. The two saws have been used very little. 3 batteries, charger, and a bag.

Scott 435-764-2368

I'll only be in austin sunday night and monday morning.

I've got other tools for sale too, Nail gun 150, Transit 250, 2 hammer drills 100 each

ALUMINIUM WALK BOARDS/SCAFFOLD (SALADO TX) $500

2008-05-11T10:32:25-05:00

MANY TO CHOOSE FROM IN VARIES WIDTHS AND LENGTHS,MOST 1 AND 2 FOOT WIDE, 28-30' LONG,ALSO KNOWN AS CARPENTER/PAINTER SCAFFOLD,CALL
512-529-6430

COLEMAN CORDLESS DRILL & FLASHLIGHT 18VOLTS (SOUTH AUSTIN) $29

2008-05-11T10:23:21-05:00

ALMOST NEVER USED COLEMAN CORDLESS DRILL AND FLASHLIGHT WITH CHARGER AND 2 BATTERYS

ET MILL 9x42, 2HP, DRO,Tools,Endmills,Reamers,Toolbox... (Leander) $4950

2008-05-11T10:12:28-05:00

JET VERTICAL MILL MODEL # JTM-1 Featuring:

Fine handwheel downfeed and lever downfeed
Heavy duty spindle brake
Double knee and table locks
Ram equipped with double locks
Precision bored and honed milling head
Chromed quill
High precision Class 7 spindle bearings
Spindle head in internally cooled
Satin chrome finished dials
Heavy duty splined motor drive
Accurite DRO 2 axis

Meehanite casting
One-piece quill pinion and shaft
Three stage power downfeed with auto. stop
Saddle features one lock
Precision hardened and ground ways and table
Adjustable gibs throughout
Dish in base with internal coolant sump (coolant pump not included)
Distance spindle to table - 17.5"
Distance spindle to column - 4.5-19"
Max. workpiece weight - 550 lbs
Main motor - 2 HP, 1 ph, 2 speed
Overall dimensions - 57W x 64D x 81"H
Approx. net weight - 2,200 lbs
Standard Accessories:
One shot lubrication system
Way covers
Draw bar
Tool box with tools
Voltage 230 v, 3 phase
Specifications: JTM-1
Table size 9x42"
Long. travel w/o power feed 23.8"
Vertical travel 14.5"
Cross travel 12.5"
Spindle taper R8
Spindle speed 80-5440(no. 16)
Swivel of Head 360 deg.
Quill travel 5"
Ram travel 13.3"
Quill feed rate 0.0015,0.003,0.006ipr
Head swivel R & L 90 Deg
Head tilt (Up & Down) 45 Deg
Spindle motor 2 speed, 230vac 1 ph
Net weight 2,200 lbs
Includes all tools, boring head, assortment of mills,taps,reamers,drills....... Thanks 512-619-2600 Call or email to make an appt.

Versatile Ladder 16� straight, 8� wide by 4� high, 7� tall A frame (Pflugerville) $40

2008-05-11T10:04:53-05:00

Ladder is sold AS-IS. The rubber feet are missing, not so good for indoor work without fixing it. All joints lock and the ladder can be used as a 4' raised platform, or a straight ladder or an A frame ladder.

Commercial Toolbox for small truck (Bastrop, TX.) $1500

2008-05-11T09:53:14-05:00

Deluxe Commercial Unit for sale for a small pickup. $1500.00
Ted 512-629-5204

Tongue Lock (Austin (south)) $20

2008-05-11T09:44:33-05:00

Tongue lock for sale (2 to choose from - black or tan) - each $20.

Tool Sale- Waterloo 13 Drawer Tool Cart (Lockhart) $700

2008-05-11T08:55:26-05:00

Waterloo Industries, 13 drawer Pro Series tool cart. Heavy duty steel ball bearing and caster, excellent condition. All drawers function with ease even when fully loaded. Made in the USA, $700.00 firm.

Tool Sale- Antique Lathe Kit (Lockhart)

2008-05-11T08:55:13-05:00

Tool Sale (Lockhart)

2008-05-11T08:55:02-05:00

Residential remodeler is making room in the shop for new equipment. Selling multiple pieces used in different trades. Due to time constraints and ease of purchase, some of the items listed will need to be sold as kits. These kits will be greatly discounted to sell quickly. Some exceptions may be made.

Barbwire kit, 900 ft, 4 star goucho with 100 2 7/8" post ties $25.00.
Hardware organizer with multiple fastners, majority cabintery service $10.00.
Wagner Paint Crew, 2 gallon hopper spray rig, unit only. Needs replacement lid and primer ball bearing but still runs and 2.5HP Skil Saw, bearing going out but still runs $20.00 for the pair.

Tool Sale (Lockhart)

2008-05-11T08:54:02-05:00

Milwaukee Hand Truck Dolly (North Austin/Round Rock) $25

2008-05-11T08:30:20-05:00

Milwaukee Hand Truck Dolly. Tires need to be inflated.
http://www.toolsdirect.com/index.cfm/page/product:display/productId/30019/manufacturer/Milwaukee%20Hand%20Trucks/categoryId/19/finish/NA
If you are interested, please call 512 413 2871 between 7am & 9pm.

Cash and Carry Only.
I can not "Hold" items, 1st come, 1st served!

Auto Emergency Auto Tool (north austin) $12

2008-05-11T08:03:50-05:00

Equip your car or truck with this all-in-one emergency tool. Whether you need a safety light to signal other vehicles or need a way to escape from your own, this multi tool is your best defense in threatening situations. Takes 4 button-cell batteries (included). 6 1/2". Metal, plastic.

Includes a Glass Breaker, LED Light, Blinking Hazard Light, Magnetic Mount, Seat-belt Cutter, Whistle and an Air-bag Punch.

Graco Spray Rig (Lago Vista) $750

2008-05-11T07:58:24-05:00

Graco Spray Rig Ultra 395 with SmartControl. Used twice on 2 new homes. CASH ONLY, NO TRADES

VARIABLE SPEED SHOP SMITH (GEORGETOWN) $350

2008-05-11T07:45:45-05:00

SHOP SMITH WITH ABOUT A $1,000. OF EXTRAS, BEEN IN STORAGE FOR THE LAST YEAR,,NEED THE ROOM,THIS IS A STEEL ! $375...RICK 786-1198

INGERSOL RAND AIR IMPACT (new braunfels texas)

2008-05-11T07:29:47-05:00

I have 3 Ingersol Rand air 1/2 impact wrenchs they have been repaired and tested you can test when you pick up 2 are $40.00 1 is $50.00 prices are firm

New gas generator for sale. (Austin) $400

2008-05-11T00:15:39-05:00

Great generator. 6.5 hp engine 120/240/12 volt operation. Three separate circuits 68 db sound level. Max power > 3100 watts. $400 call 512-905-5844 I can email or send picture message if you have a cell phone that can recieve pics.

Looking to buy: Bandsaw & Exotic Woods (Austin) $1

2008-05-10T23:49:38-05:00

I am looking to purchase a bandsaw and exotic woods

Looking for something that has at least 6" throat w/ an option to add a riser. Looking to start getting into veneering and would like to resaw my own.

In addition, if you have any exotic woods, I am working on a few projects that I want to try some inlays and accents.... pretty open to type of woods & sizes (from 1 linear foot, to various board feet in length)

Drop me an email if you are looking to post something similar, might be able to close the deal ASAP.

I will be out of town later this week thru Monday, so if I don't get back right away, I'll get in touch with you early next week upon my return. Either case, ready to pay cash now.

craigslist | tools in austin

Honda Harmony 21" Mower OHV (NW Austin) $199

Riding Lawnmower (bastrop)

14 volt Black and Decker battery charger $25

Senco Nail Finish Pro Gun (Cedar Park) $75

Paslode Roofing Stapler (Cedar Park) $35

Wagner Airless Paint Sprayer (Cedar Park) $100

Plazma Cutter (50Amp) (Pflugerville) $420

Complete Victor torch, gauges, bottles, cart (2 each) (GIDDINGS) $460

10" radial arm saw (East Austin) $100

lincoln 135 amp 110 volt welder (east austin) $325

job box for job site or trailer like new (san marcos) $200

concrete mixer (san marcos) $200

Used Skilsaws (Hutto) $50

snap on toolbox (leander) $3000

Workmate Workbench (central austin) $25

Grizzly sheetmetal Brake model G7150... (so austin) $900

**Brand new Under counter lights**** (austin) $40

BRAND NEW MOTION SENSORED FLOOD LIGHTS (SOUTH) $40

new #8 gauge sears heavy duty jumper cables (south austin) $15

Brake Lathe For Sale (Buda)

Shape-Rite Model B 8" Metal Shaper (North Austin) $750

FOUR Chain Saws for one low price (Central Austin) $80

Enco 9x42 3HP Varispeed Milling Machine (North Austin) $2750

craftsman 26 piece 1/4 to 1 1/8 open end box end wrench set in case. (south austin) $36

207 piece tool case, never used. (south austin) $55

Golf Club Sanding and Refinishing Machine (7200 South 1st Street) $175

Speedaire compresor (nw austin) $175

Almost new cordless DRILL - with charger (South Austin) $15

power tools (Bastrop)

Ryobi Cordless Drill / Driver & Vacuum cleaner, & Carrying Case (Parmer Ln / Mopac) $15

Office Closing, Desks & Tools (Leander) $1

Work Benches (7200 S 1st St 78745) $175

Large Bucket for Forklift (N. Austin) $900

Like new 5550 generator (price reduced) (Kyle) $500

Shop Vac (RR) $30

Assorted Wood Clamps $2

Rockwell Table Saw - 12" (Buchanan Dam, TX) $325

Coleman Powermate Electric Generator (Buchanan Dam, Tx) $450

Dillon Case Cleaner and Media Seperator (North Austin) $100

Misc. Tools (South Austin) $85

DeWalt DW331K Jigsaw - Sells new for $170 (Anderson Mill area) $100

STIHL Electric Trimmer FSE 60 (Wimberley or Round Rock) $60

landis 5 in 1 leather tool (austin texas) $200

Temperature Chamber, Thermotron, Heat, Cool, Humidity (Leander) $5500

Craftsman 6.5 hp 22" Lawn Mower (Round Rock) $100

Hydraulic Press, 60T,USA Made, (Leander) $2500

Craftsman Air Operated Framing Nailer (Austin/Elgin) $100

Honda ES4500 Generator (Cedar Park area) $400

*** POWERS FASTENERS BITS FOR SALE *** (AUSTIN , TEXAS) $40

Proto 3/4" Drive Sockets - Great for Tractor Work! (NE Austin) $145

10" DELTA TABLE SAW (Kyle-Buda) $95

Welder, Saw and Drillpress (Hutto, TX) $750

Rigid Compound Miter Saw, Like New (AUSTIN) $85

Craftsman 3 Drawer ToolBox (South Austin) $40

Ingersoll Rand 1/2" Drive Impact (South Austin) $120

Hobart Beta Mig 250 Welder: Sell or trade (Wimberley) $895

DeWalt 18 V Hammer drill and circ. saw (or trade) (Austin) $85

air regulators (austin) $40

18" Sears Scroll Saw with Table -- $40 (Pflugerville)

RKI Tool Box (SW Austin) $450

trailer (Cedar Park) $260

Radial Arm Saw (Cedar Park) $150

10" Chop/miter Saw (Kyle) $50

10" table saw (Kyle) $70

mechanics tools (nw austin) $450

Craftsman 3800 Watt Generator (Central Texas) $450

Craftsman 15 gallon/3 HP Air Compressor (Central Texas) $165

Heavy Duty Tool Lot, Snap-on, Craftsman, 3/4 Drive R + S set & more (South Austin) $350

Skil Model 1823 Plunge Router (2222/620) $40

ToolPak by Paktek(Attention A/C Techs and Electricians) (South Austin) $50

Ryobi Belt Sander BE321T2 (222/620) $25

porter cable 7500 wattt generator (south austin) $800

TWO LARGE 10HP TUBILAR STAINLESS STEEL BLOWER / ATTACHMENTS (AUSTIN) $2000

Stanley� Blower Fan NEW (AUSTIN) $35

Craftsman Air Compessor 4HP/25 Gal (dripping springs) $200

1/0 welding leads (183 & 71) $150

Tool Sale- Grinder, Router, Sander, Drill, Compressor (LOCKHART)

Greenlee Job Box (Lockhart) $300

BOSCH Hammer drills 1- like new, 1 - like used $100

Brand new Under counter lights** (austin) $40

* POWERS FASTENERS BITS FOR SALE * (AUSTIN , TEXAS) $40