favorite
favorite
hide
unhide
flag

Posted

print

SANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low - $1,100 (parmer and mopac)

SANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 1 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 2 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 3 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 4 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 5 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 6 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 7 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 8 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 9 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 10 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 11 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 12 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 13 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 14 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 15 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 16 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 17 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 18 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 19 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 20 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 21 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 22 thumbnailSANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low 23 thumbnail
condition: good
make / manufacturer: Sansui
model name / number: 9090DB
SANSUI 9090DB Receiver Vintage Parts Repair Right Channel Low VIDEO DEMO! 🎥📺✅
This receiver is in good cosmetic condition and it seems to be mostly working. When I tested in Aux and Phono modes the right channel is much lower in volume than the right. When testing in Tape and FM modes (as shown in the video) both sides are equal. I test A, B & C speaker outputs and they are working. The volume, balance and tone controls seem to be working. The power meters move like they should as does the FM signal meters. All the controls and buttons seem to move normally with no signs of damage. The wood case is split along the top left edge. The left piece of wood still screws into the chassis so it all looks okay but the top and side are not together anymore. This is a vintage piece so it is being sold as is for parts or repair. Feel free to reach out with any questions.

I can send a video demo

post id: 7878701227

posted:

best of [?]

loading
reading
writing
saving
searching